Download: RSS | Email Alerts | Mobile
Set Text Size SmallSet Text Size MediumSet Text Size LargeSet Text Size X-Large

Hoses and belts


Last Update: 3/28/2003 1:53 pm
Every hour your engine operates, it pumps about 75 hundred gallons of coolant through the hoses at temperatures a little over 200 degrees. This kind of abuse can take it's toll on your coolant hoses, so it's smart to keep an eye on them. Look for swollen areas and cracks. Feel the hoses, checking for soft spots or hardness, both are signs of trouble. Check the clamps, too. You may even want to replace the spring clamps with frequent inspection. With the engine off, roll each belt around and look at the inside surface. Cracks, splits and oil contamination are telltale signs of an aging belt. Inspect both the belts and hoses on a regular basis. And remember, belts over four years old can fail at any time. If one does, replace them all. A broken belt, like a broken hose, can leave a car stranded.

©2006 Crossroads Mobile. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed.

Car Care
Electrical
Engines
Fuel System
Emergencies
General Information
Professional Repairs
Tires
Auto Insurance
Owning and maintaining an automobile can be quite a financial commitment. In order to protect yourself and your car in the event of an accident, it is important to purchase auto insurance.
Auto Parts
General Maintenance
Auto Systems
Preventive Care
Professional Repairs
Tires
General Information
New Cars
Auto Options
Pre-Owned Cars
Fuel & Oil


  This site is hosted and managed by Inergize Digital.